Using Composite Video (Good) - Insignia NS-39D400NA14 User Manual

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
Composite Analog audio
video cable cable
connector connectors
Composite Analog
video jack audio jacks
To connect a cable or satellite box using composite video:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back
of your TV and to the composite video and audio out jacks on the cable or satellite box.
Notes
• The COMPONENT/AV Y/VIDEO, P
• When you connect the audio using the L and R audio jacks, the audio
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select Component/AV, then press ENTER.
15
COMPONENT/AV Y/VIDEO jack.
a component device) share the L and R audio jacks with the
COMPONENT/AV Y/VIDEO jack (used to connect a composite device).
output is analog.
www.insigniaproducts.com
NS-39D400NA14 Insignia 39" LED TV
AV cable
(composite video cable)
Back of TV
, and P video jacks (used to connect
B R
Cable or
satellite box