Connecting A Cable Or Satellite Box; Using Hdmi (Best) - Insignia NS-39D400NA14 User Manual

Insignia 39" LED TV

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see

Using HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
To connect a cable or satellite box using HDMI:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight HDMI1 or HDMI2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
"What connection should I
Side of TV
www.insigniaproducts.com
use?" on page 11.
HDMI cable
Cable or
satellite box
12