Using Dvi (Same As Hdmi But Requires An Audio Connection) - Insignia NS-39D400NA14 User Manual

Using DVI (same as HDMI but requires an audio connection)

Note
You must use the HDMI1/ARC/DVI jack to connect a cable or satellite box
using DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
On your TV
HDMI cable 3.5mm audio
connector connector
HDMI 1/
PC/DVI
ARC/DVI
AUDIO IN
jack
jack
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 1/ARC/DVI jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the
AUDIO OUT jacks on the cable or satellite box.
Note
When you connect the audio using the PC/DVI AUDIO IN jack, the audio
output is analog.
6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to highlight HDMI1, then press ENTER.
13
Side of TV
www.insigniaproducts.com
NS-39D400NA14 Insignia 39" LED TV
HDMI cable with
HDMI-DVI adapter
Back of TV
Cable or
satellite box
3.5mm audio
cable