Figure 30. Checking The Supported_Drivers Variable; Figure 31. Verifying Proper Configuration Of Fcoe Vlan - Dell Wyse R Class Manual

Implementing FCoE in the Linux Operating System
Figure 30.
4. Then, start the lldpad and fcoe services running the service lldpad start and
service fcoe start commands. Then running the fcoeadm -i command to verify that
the FCoE VLAN is properly configured, as in Figure 31.
Figure 31.
5. Finally, verify LUNs device name by listing all available partitions using the cat
/proc/partitions command, as in Figure 32.
Checking the SUPPORTED_DRIVERS variable.
Verifying proper configuration of FCoE VLAN.
27