Figure 17. Restarting The Rclldpad And Rcfcoe Daemons; Figure 18. Failure To Detect Installation Media - Dell Wyse R Class Manual

Implementing FCoE in the Linux Operating System
Figure 17. Restarting the rclldpad and rcfcoe daemons.
In some SLES 11 SP2 installations, YaST2 fails to properly detect the SLES 11 SP2 installation media, as
in Figure 18.
Figure 18. Failure to detect installation media.
The failure to detect installation media is most commonly due to the SLES 11 SP2s configuration files
pointing to the incorrect location of the installation media software repository. To correct this issue,
perform the following steps:
1. Start YaST2 using the yast command, and then select Software in the left-side menu, and
then select Software Repositories on the right side menu, as in Figure 19.
21