Loading The Smartmedia; Removing The Smartmedia - FujiFilm FinePix 50i Owner's Manual

LOADING THE SmartMedia

™
SmartMedia (sold separately)
I Only use 3.3V SmartMedia
MG-4S ( 4MB), MG-16SW ( 16MB, ID)
MG-8S ( 8MB), MG-32SW ( 32MB, ID)
MG-16S (16MB), MG-64SW ( 64MB, ID)
MG-32S (32MB), MG-128SW (128MB, ID)
MG-64S (64MB)
G
!
Image files cannot be recorded or erased if a write-
protect sticker is affixed to the SmartMedia.
G
!
Operation of this camera is only guaranteed when it
is used with FUJIFILM SmartMedia.
G
!
Some 3.3V SmartMedia are labelled as "3V" or ID"
cards.
G
!
See P.114-115 for more information on SmartMedia.
A SmartMedia with ID is needed to use the
music function.
16
™
1 0
0 2
1Check that the camera is switched off and then slide
the battery cover in the direction of the arrow to open it.
2Push the SmartMedia firmly into the SmartMedia
slot as far as it will go.
3Close the battery cover.
G
!
If you open the battery cover while the camera is
switched on, the camera automatically switches off to
protect the data on the SmartMedia.
G
!
The SmartMedia will not slide fully into the slot if it is
inserted facing the wrong way. Be careful not to apply
undue force to the SmartMedia.

REMOVING THE SmartMedia

1
3 0
1Check that the indicator in the viewfinder is
green and then switch the camera off.
2Slide the battery cover in the direction of the
arrow to open it.
G
!
See P.18 for information on switching the camera on
and off.
Never open the battery cover while the
camera is still switched on. This could
damage the SmartMedia or corrupt the
image files on the SmartMedia.
™
2
0 1
Push the SmartMedia into the slot slightly and
0 2
allow it to pop back out. It can then be pulled out
easily.
G
!
To protect the SmartMedia, always store it in the
special anti-static case.
N
Printing Images and Downloading
Images to a PC
h See P.81, 107 for information on printing
images.
h Refer to the Software Quick Start Guide
(provided) for information on downloading
images to your PC.
1
N
17