Multi-Frame Playback; Erasing Single Frame - FujiFilm FinePix 50i Owner's Manual

MULTI-FRAME PLAYBACK

1
Normal playback
No text displayed
Multi-frame playback
Pressing the "DISP" button during playback
switches the LCD monitor to the next display
mode. Press the "DISP" button until the multi-
frame playback screen (9 frames) appears.
G
!
The LCD monitor text display disappears after
approximately 3 seconds.
G
!
Playback zoom cannot be used with multi-frame
38 playback.
2
0 1
1Select a frame by using "d", "c", "a( )" and
"b( )" to move the cursor (the orange box)
to the desired frame. Press "a( )" or "b(
several times to switch to the previous page
or the next page.
2You can enlarge the selected image by
pressing the "DISP" button again.
G
!
Multi-frame playback is also useful for specifying erase,
protect and DPOF settings for single frames and for
selecting images when you want to check or cancel
DPOF settings.

ERASING SINGLE FRAME

1
2 0 1 0
1Set the Mode switch to "
2Press the "MENU/OK" button to display the
)"
Menu screen on the LCD monitor.
G
!
See P.72 for more details of the "
G
!
Multi-frame playback (➡P.38) is an easy way to
select images to be protected.
2
2 0
". Select "FRAME" in the "
press the "MENU/OK" button.
ERASE" menu.
2
ERASE" menu and
39