Playback (Automatic Playback); Setting And Removing Single-Frame Protection - FujiFilm FinePix 50i Owner's Manual

PLAYBACK ( AUTOMATIC PLAYBACK )
}
PLAYBACK MENU
1
Press the "MENU/OK" button to display the
menu on the LCD monitor.
G
!
The Auto Power Off function does not operate during
playback.
G
!
Playback of the movie or voice caption begins
automatically. When playback ends, the camera
advances to the next frame. Audio recordings and
music are not played back in this mode.
I Available time using the battery
(when fully charged)
76 Continuous playback Approx. 80 min.
2
0 1
1Use "d" or "c" to select " } PLAYBACK".
2Press the "MENU/OK" button. The image
frames are automatically advanced and
played back.
G
!
If you press the "DISP" button once during playback,
the playback frame number is displayed on the LCD
monitor.
G
!
}
To interrupt " PLAYBACK", press the "BACK"
button.
O
PLAYBACK MENU
1
0 2
Press the "MENU/OK" button to display the
menu on the LCD monitor.
G
!
Multi-frame playback is an easy way to select
images to be protected (➡P.38).
G
!
Music cannot be protected.
Protection can be set for an image to prevent it
from being inadvertently erased. However,
note that formatting erases all images (➡P.72).

SETTING AND REMOVING SINGLE-FRAME PROTECTION

2
2 0
1Use "d " or " c" to select "
2Use "a( 8 )" or "b( 9 )" to select "FRAME
SET/RESET".
3Press the "MENU/OK" button.
1 0 3 0
4
O PROTECT".
77