Table of Contents
Advertisement
LOADING THE BATTERIES
Compatible batteries
Use AA-size alkaline batteries (2) or AA-size
nickel-metal hydride (Ni-MH) batteries (2).
N
N
Notes on Handling Batteries
hIt is recommended that you use same brand
of alkaline batteries as those supplied with the
camera.
hDo not use different types of batteries or old
and new batteries together.
hYou cannot use lithium, manganese or nickel-
cadmium (Ni-Cd) batteries.
hThe operating lives of alkaline batteries vary
between brands and the life of batteries you
purchase may be shorter than the alkaline
batteries provided with the camera. Note also
that due to the nature of alkaline batteries, the
time for which they can be used is shorter in cold
locations (at temperatures of +10°C (+50°F) or
below). Consequently, Ni-MH batteries are
recommended.
hSoiling (fingerprints, etc) on the terminals of
batteries can greatly reduce the time for which
the batteries provide power.
hYou will need the optional charger (➡P.65) to
recharge Ni-MH batteries.
hSee P.68 for notes on using batteries.
12
0
1
2
0
1Slide the battery cover out and lift it open.
2Insert the batteries correctly as indicated by
the polarity icons.
3Close the battery cover.
G
!
Do not apply excessive force to the battery cover.
G
!
Take care not to drop the batteries when you open
or close the battery cover.
G
!
You should carry a spare set of batteries (sold
separately) when taking pictures.
LOADING THE SmartMedia
™
( sold separately )
SmartMedia
0
3
I Only use 3.3V SmartMedia
MG-4S ( 4MB), MG-16SW ( 16MB, ID)
MG-8S ( 8MB), MG-32SW ( 32MB, ID)
MG-16S (16MB), MG-64SW ( 64MB, ID)
MG-32S (32MB), MG-128SW (128MB, ID)
MG-64S (64MB)
G
!
Image files cannot be recorded or erased if a write-
protect sticker is affixed to the SmartMedia.
G
!
Operation of this camera is only guaranteed when it
is used with FUJIFILM SmartMedia.
G
!
Some 3.3V SmartMedia are labelled as "3V" or ID"
cards.
G
!
See P.71 – 72 for more information on SmartMedia.
™
0
1
2
0
Gold marking
Gold marking
1Check that the camera is switched off. Then hold the
camera so that the battery cover faces upwards and
slide the cover out to open it.
2Push the SmartMedia firmly into the SmartMedia
slot as far as it will go.
3Close the battery cover.
G
!
If you open the battery cover while the camera is still
switched on, the camera is automatically switched off to
protect the SmartMedia.
G
!
The SmartMedia will not slide fully into the slot if it is
inserted facing the wrong way. Be careful not to apply
undue force to the SmartMedia.
3
0
1
13
Hide quick links:
Advertisement
Table of Contents
