Table of Contents
Advertisement
Use the:
1
Paper support
2
Display
3
Operator panel
4
Paper exit tray
5
Top cover
6
Paper guide
7
Printer (scanner
unit)
8
Scanner lock
9
Scanner support
10 USB cable
11 Power supply
When you want to:
Load paper in the All-In-One.
Check the status of the All-In-One.
Operate your All-In-One (attached to a computer or unattached).
Your operator panel has a FAX button. In order for the FAX button to function
properly:
Your computer must be connected to a data/fax modem.
The data fax modem must be connected to an active analog phone line.
The printer must be connected to the computer with a USB cable.
NOTE:
You cannot fax with a DSL (digital subscriber line) or cable modem.
Stack paper as it exits the All-In-One.
Place an item on or remove an item from the scanner glass.
Make sure paper feeds correctly into the All-In-One.
Change cartridges.
Unlock the scanner.
Lock the scanner.
NOTE:
Lift the scanner unit to do these things.
Lock or unlock the scanner.
NOTE:
Unlock the scanner before use. Lock the scanner if you are moving your
All-In-One.
Keep the scanner unit open to change cartridges, unlock the scanner, or lock the
scanner.
Connect your All-In-One to a computer.
Supply power to the All-In-One.
Advertisement
Table of Contents
