Physical Description; Dimensions/Weight; Interfaces - Dell PowerConnect W-Series FIPS Manual

2.4.1 Physical Description

The Aruba AP-175 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard case. The module contains two 802.11 a/b/g/n transceivers, and 4 x N-
type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support (supports MIMO)
The hard case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
AP-175P-F1
AP-175AC-F1
AP-175DC-F1
The exact firmware versions tested were:

ArubaOS_6xx_6.1.2.3-FIPS

Dell_PCW_6xx_6.1.2.3-FIPS
2.4.1.1

Dimensions/Weight

The AP has the following physical dimensions:

260 mm x 240 mm x 105 mm (10.2" x 9.4" x4.1")

3.25 kg (7 lb)
2.4.1.2

Interfaces

The module provides the following network interfaces:

1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

Antenna
o
4 x N-Type female antenna interfaces

1 x RJ-45 console interface
The module provides the following power interfaces:

AP-175P:

AP-175AC:

AP-175DC:
Dell Corresponding Part Number
W-AP175P-F1
W-AP175AC-F1
W-AP175DC-F1
48-volt DC 802.3at power over Ethernet (PoE+)
100-240 volt AC from external AC power source
12-48 volt DC from external DC power source
14