Physical Description; Dimensions/Weight; Interfaces; Indicator Leds - Dell PowerConnect W-Series FIPS Manual

2.3.1 Physical Description

The Aruba AP-105 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard plastic case. The module contains two dual-band 2.4-GHz/5-GHz
802.11 a/b/g/n transceivers, and 4 x integrated, omni-directional antenna elements (supporting up to 2x2
MIMO with spatial diversity).
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
AP-105-F1
The exact firmware versions tested were:

ArubaOS_6xx_6.1.2.3-FIPS

Dell_PCW_6xx_6.1.2.3-FIPS
2.3.1.1

Dimensions/Weight

The AP has the following physical dimensions:

132 mm x 135 mm x 45 mm (5.2" x 5.3" x 1.8")

0.3 kg (10.56 oz)
2.3.1.2

Interfaces

The module provides the following network interfaces:

1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

Antenna (internal)

1 x RJ-45 console interface
The module provides the following power interfaces:

48 V DC 802.3af power over Ethernet

12 V DC for external AC supplied power (adapter sold separately)
2.3.1.3

Indicator LEDs

There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 4- AP-105 Indicator LEDs
Label Function
PWR AP power / ready status
Dell Corresponding Part Number
W-AP105-F1
Action
Off
Red
Flashing – Green
On – Green
12
Status
No power to AP
Initial power-up condition
Device booting, not ready
Device ready