Dimensions/Weight; Interfaces; Indicator Leds - Dell PowerConnect W-Series FIPS Manual

The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
AP-93-F1
The exact firmware versions tested were:

ArubaOS_6xx_6.1.2.3-FIPS

Dell_PCW_6xx_6.1.2.3-FIPS
2.2.1.1

Dimensions/Weight

The AP has the following physical dimensions:

120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")

255 g (9 oz)
2.2.1.2

Interfaces

The module provides the following network interfaces:

1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

Antenna (internal)

1 x RJ-45 console interface
The module provides the following power interfaces:

48 V DC 802.3af power over Ethernet

12 V DC for external AC supplied power (adapter sold separately)
2.2.1.3

Indicator LEDs

There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 3- AP-93 Indicator LEDs
Label Function
PWR AP power / ready status
ENET Ethernet Network Link
Status / Activity
Dell Corresponding Part Number
W-AP93-F1
Action
Off
Red
Flashing – Green
On – Green
Off
On – Amber
On – Green
10
Status
No power to AP
Initial power-up condition
Device booting, not ready
Device ready
Ethernet link unavailable
10/100Mbs Ethernet
negotiated
1000Mbs Ethernet link negotiated
link