Front Panel - SMC Networks Barricade SMCWGBR14-N User Manual

Front Panel

POWER LED
A solid green LED indicates the SMCWGBR14-N is receiving power – normal operation. If the LED is
off there is no power to device or failure.
LAN1-4 LED
A solid orange LED indicates the corresponding LAN port connection is established. The LED blinks
when data is transmitted. If the LED is off there is no link for corresponding LAN port.
WAN LED
A solid orange LED indicates the WAN port connection is established.
The LED blinks when
data is transmitted. If the LED is off there is no link for the WAN port.
WLAN LED
A solid orange LED indicates the wireless AP is ready.
The LED blinks when wireless data is
transmitted.
WPS LED
After pressing the WPS button for 4 seconds the WPS LED will blink continually. When a
client joins the network successfully the LED will stop blinking and become solid until the next
WPS action or the device is rebooted. If no client joins the LED will stop blinking and switch
off after 4 minutes.
WPS Button
Press and hold the WPS button for 4 seconds to automatically configure wireless security. If the client
device supports WPS Push Button Configuration (PBC) you will need to press the button within 60
seconds to automatically configure security on the client. Note: WPS LED will start to flash after
pressing WPS button for 4 seconds. When a client joins the network successfully the LED will stop
12