SMC Networks Barricade SMCWGBR14-N User Manual page 42

reported slightly lower than before on such connections, but gives much better
results.
Detected xDSL or Frame Relay Network
When Connection Type is set to Auto-detect, the automatically detected
connection type is displayed here.
StreamEngine Rules
A StreamEngine Rule identifies a specific message flow and assigns a priority to that
flow. For most applications, automatic classification will be adequate, and specific
StreamEngine Rules will not be required.
Conflicting rules are not permitted. Conflicting rules are those that share any
combination of source address/port, destination address/port, and protocol. Rejecting
conflicting rules ensures that every flow defined in a rule receives the expected
priority and avoids indeterminate prioritization that could reduce QoS effectiveness.
Name
Create a name for the rule that is meaningful to you.
Priority
The priority of the message flow is entered here -- 1 receives the highest priority
(most urgent) and 255 receives the lowest priority (least urgent). Priority 0 is
reserved. Flows that are not prioritized by any rule receive lowest priority.
Protocol
The protocol used by the messages. The common choices can be selected from
the drop-down menu. To specify any other protocol, enter its protocol number
(as assigned by the
Source IP Range
The rule applies to a flow of messages whose LAN-side IP address falls within
the range set here.
Source Port Range
The rule applies to a flow of messages whose LAN-side port number is within
the range set here.
Destination IP Range
The rule applies to a flow of messages whose WAN-side IP address falls within
the range set here.
Destination Port Range
The rule applies to a flow of messages whose WAN-side port number is within
the range set here.
Add/Edit StreamEngine Rule
IANA) in the Protocol box.
39