Siemens CF62 User Manual page 75

74 Setup
APN: Enter service provider
address.
Login name: Enter login name.
Password: Enter password (shown
as a series of asterisks).
DNS1 / (optional).
DNS 2:
Save settings.
§Save§
KmK
§Menu§
K
Select function.
HTTP profile
I
Select profile.
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be ena-
bled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
E
Set the required mode.
Connectivity
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following function is available
for two seconds:
Switch to
§Voice/fx§
mode; you may now send
a fax.
Rec voice/fax
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connection).
End transmission
End transmission with PC software
B
and/or press
Rec fax/data
Your service provider has given you
a number for telephoning and a fax/
data number.
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.
Send voice/fax
.
b
b