Siemens CF62 User Manual page 71

70 Setup
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress.
If is activated (page 69),
Call waiting
you will hear the call waiting tone
during a call.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
s
Display if status is
unknown (e.g. with
a new SIM card).
Clear all
All set diverts are cleared.
Additional information
Note that the divert is stored in the network
and not in the phone (e. g., when the SIM
card is changed).
Check condition or delete it
First select the condition.
§Select§
Check status
Or
Delete
Reactivate divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm phone number.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
§Delete§
Enter new number and confirm.
b
Press.
Select.
Select.
Press. The phone number is
deleted.