Siemens CF62 User Manual page 79

78 Setup
Create new entry:
• Select empty line, press §Entry§,
then select another entry from the
list of service providers and confirm.
Change/delete entry:
• Select entry, press §Change§, then
select another entry from the list
of service providers and confirm or
press §Clear§.
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, network
reconnection is speeded up (and
standby time is reduced).
KmK
§Menu§
K
User group
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for example,
or special tariffs apply. The details
can be clarified with your service
provider.
Active
Activate/deactivate function. "User
group" must be deactivated for normal
phone use (phone code, page 15).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
b
Outgo. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred group
If activated, only calls within this
standard user group can be made
(depending on the network configu-
ration).
Network
Select function.
b