Table of Contents
Advertisement
Basic adjustment settings
Power control
Power Control setting allows you to reduce the display brightness to save energy.
MENU
Power control
Power Save
[Save1]
Standard
Save1
Save2
Auto
MENU
Power control
No Signal off
[Enable]
Disable
Enable
Power control for AV source
Power save
When set to "Save1", "Save2" or "Auto", power
consumption is reduced by decreasing picture
brightness.
1
Press MENU.
2
Press a/b to select "Power control", and then
press ENTER.
3
Press a/b to select "Power Save", and then press
ENTER.
4
Press a/b to select the desired mode, and then
press ENTER.
5
Press MENU to exit the menu.
Selected item
The screen darkens slightly to conserve
Save1
power consumption.
The screen darkens more significantly to
Save2
conserve power consumption.
Screen brightness adjusts according to
AUTO (OPC)
the ambient light of the room to conserve
power consumption.
A
• When setting to "Auto", make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• "Standard" is factory preset value.
• Return to the previous menu by pressing RETURN.
No signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU.
2
Press a/b to select "Power control", and then
press ENTER.
3
Press a/b to select "No Signal off", and then press
ENTER.
4
Press a/b to select "Enable", and then press
ENTER.
5
Press MENU to exit the menu.
• Five minutes before the power shuts down, a warning
will display every minute.
A
• "Disable" is factory preset value.
• Return to the previous menu by pressing RETURN.
• When a TV programme finishes, but the AVC System
receives signal input, this function may not operate.
Description
39
Advertisement
Table of Contents
