Input Signal (Pc Input Mode Only); Fine Sync - Sharp Aquos LC-30HV4H Operation Manual

Useful adjustment settings

Input signal (PC input mode only)

• Some input signals may have to be registered manually
to display properly.
• The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640g400
640g480
1024g768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
720g400
848g480
1280g768
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Setup".
• Setup menu displays.
3
Press a/b to select "Input Signal" and then
press ENTER.
PC MENU
Setup
Input Signal
Auto Sync.

Fine Sync.

Rotate
Language
4
Press a/b to select the desired input signal
on the display.
PC MENU
Setup
Input Signal
Option
[Normal]
[English]
640 x 480
848 x 480
(Example)
51