Colour System Setting (Av Input Mode Only); Av Mode Selection - Sharp Aquos LC-30HV4H Operation Manual

Useful adjustment settings
Colour system setting (AV input
mode only)
u can change the colour system to one that is
Yo
compatible with the image on the screen.
1
Press MENU and the TV MENU screen
displays.
2
Press c/d to select "Option".
• Option menu displays.
3
Press a/b to select "Colour System", and
then press ENTER.
TV MENU
Option
Input Select
Audio Out
Cool Climate
Colour System
4
Press a/b to select a compatible video
signal system of your equipment, and then
press ENTER.
• Some items may be greyed out. They are not
selectable.
TV MENU
Option
Colour System
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
48
[Fixed]
[Off]
[AUTO]
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43

AV mode selection

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
1
Press AV MODE.
• Present AV mode displays.
2
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV MODE: STANDARD
AV MODE: USER
AV MODE: GAME
PC input mode
AV MODE: STANDARD
Selected item
For a highly defined image in a normally
STANDARD
bright room
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing
For a movie
MOVIE
GAME Lowers image brightness for easier viewing.
Allows the user to customise settings as
USER desired. You can set the mode for each
input source.
AV MODE: DYNAMIC
AV MODE: MOVIE
AV MODE: USER
Description