Table of Contents
Advertisement
Setting color mode
Color tone can be set as below.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel
sRGB
sRGB is international standard of color representa-
tion specified by IEC (International Electrotechnical
Commission).
Color conversion is made in taking account of liquid
crystal's characteristics and represents color tone
close to it original image.
VIVID
Displays an image with dynamic and VIVID primary
colors.
Set by using COLOR MODE. Pressing the button
alternates STD > sRGB > VIVID > STD sequentially.
-
When you use this monitor in sRGB mode, set
WHITE BALANCE to STD.
Adjustment lock function
By disabling the control buttons (i.e. setting the lock)
any attempted changes to adjusted values will be
voided.
1. Turn off the monitor power.
2. While pressing the MENU button, press the
power button (i.e. turn the power on).
Continue to press the button until either message
of the following appears on the screen.
When the menu is unlocked:
[ADJUSTMENT LOCKED] will appear on
the screen, and the lock will be set.
When the menu is locked:
[ADJUSTMENT UNLOCKED] will appear
on the screen, and the lock will be removed.
Note:
-
When the lock is in place, all buttons other than
the power button are disabled.
Adjusting the screen display
ADJUSTMENT menu reset
Resetting ADJUSTMENT Menu(for Analog signal)
The values in ADJUSTMENT menu can be returned
to their original ex-factory values.
1. Turn on the monitor power.
2. Press the MENU button and the
simultaneously. When [RESET] appears on the
screen, the reset is complete.
Resetting all adjustment values
All adjustment values can be returned to their
original ex-factory values in one command.
1. Turn off the monitor power.
2. Press the MENU button and the SELECT button
simultaneously, and while doing this press the
power button (i.e. turn the power on). When [ALL
RESET] appears on the screen, the reset is
complete.
3. Turn off the monitor power once when the reset is
complete.
Notes:
-
While [ALL RESET] is displayed, the control
buttons are disabled.
-
It is not possible to reset values when the
adjustment lock is in place. Remove the
adjustment lock before attempting to operate
control buttons.
20
button
Advertisement
Table of Contents
