Sharp VC-FH70GM Operation Manual page 23

ADVANCED OPERATION
AUDIO DUBBING
1.
MENU
Press , to display the main menu
on the screen.
2.
Press [ /
3.
Press SET .
4.
Press [ /
5.
Press [ / ] to select ON.
6.
Press SET , to return to the menu screen.
7.
Press MENU , to exit to the normal screen.
NOTES: .
• Do not start audio dubbing until AUTO or MANUAL tracking has been completed as the
audio signal will not be recorded correctly.
• Because the audio signal is recorded onto the mono track any previous recording on
this track will be erased.
• If AUDIO MIX in the mode menu is set to OFF, no sound will be heard during audio
dubbing.
PLAYING BACK AN AUDIO DUBBED TAPE
• If you want to listen to the original and the new dubbed audio signal simultaneously, you will
need to set AUDIO MIX to ON.
• You can change the audio output by pressing the AUDIO OUT button on the remote
control. Refer to the table below.
AUDIO MIX AUDIO OUT MODE
ON
] to select MODE.
] to select AUDIO MIX.
Hi-Fi and Mono audio
MODE MENU SCREEN
©
AUD I O M I X
1 6 : 9
: S E L E C T
S E T : E N T E R
VCR DISPLAY
L R
Original Hi-Fi audio (L channel)
L
Original Hi-Fi audio (R channel)
R
GB-23
ON O F F
AU T O O F F
: CHANGE
ME NU : E X I T
RESULT
Original Hi-Fi audio (L&R
channels) and dubbed audio
plus dubbed audio
plus dubbed audio