Power Control For Pc Source - Sharp LC-30HV2E Operation Manual

Basic adjustment settings
MENU
ENTER
/
MENU
Power Control
Power Save [Save1]
Standard
Save1
Save2
Auto
MENU
Power Control
Power Management [Off]
Off
Mode1
Mode2

Power control for PC source

Power control allows you to reduce display brightness
and save energy.
Power save
1
Press MENU.
2
Press a/b to select "Power Control", and then
press ENTER.
3
Press a/b to select "Power Save", and then press
ENTER.
4
Press a/b to select the desired mode, and then
press ENTER.
5
Press MENU to exit the menu.
A
• "Standard" is factory preset value.
• Return to the previous menu by pressing RETURN.
Power management
When set, the power will automatically shut down.
1
Press MENU.
2
Press a/b to select "Power Control", and then
press ENTER.
3
Press a/b to select "Power Management", and
then press ENTER.
4
Press a/b to select "Mode1" or "Mode2", and then
press ENTER.
5
Press MENU to exit the menu.
A
• Return to the previous menu by pressing RETURN.
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the computer and
the signal inputs again, the System stays
Mode1
off.
• The System turns on again by pressing
STANDBY/ON button on the Display or B
on the remote control unit. (See page 12.)
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the computer and the
signal inputs again, the System turns on.
Description
37