Table of Contents
Advertisement
Watching TV
Display
STANDBY/ON button
STANDBY/ON indicator
AVC System
STANDBY/ON indicator
POWER
Display status indicator
Off
Power off
Flashing red
AVC System does not turn on or its AC cord is disconnected.
Red
The System is in standby mode.
Green
The System turns the power on.
AVC System status indicator
Power off
Off
Only the AVC System is in standby mode or the System is in standby mode.
Red
The System turns the power on.
Green
12
Turning on the power
1
2
MAIN POWER
When turning the AVC System on first
1
2
A
• "System" above means the Display and AVC System.
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 21 to try auto installation from the Setup
menu.
Turning off the power
1
2
3
A
• If you are not going to use this System for a long time, be sure to remove
the AC cord from the power outlet.
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display flashes red.
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
Press MAIN POWER on the Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Display lights up green and
the one on the AVC System lights up green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or STANDBY/ON button on the Display
to turn the System on.
Press B on the remote control unit or STANDBY/ON button
on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both STANDBY/ON indicators change from green to red.
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the one on the Display flashes red.
Press MAIN POWER on the Display.
• The STANDBY/ON indicator on the Display turns off after
approximately 5 seconds.
Advertisement
Table of Contents
