Table of Contents
Advertisement
Using external equipment
Viewing an image from a computer
Connecting a computer
Use the PC terminals to connect a computer.
A
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 63 for a list of computer signals compatible with the System.
AVC System (front view)
Signal names for 15-pin mini D-sub connecter
5
4
3
2
1
10
9
8
7
6
15
14
13
12
11
44
RGB cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
Pin No.
Signal name
1
R
2
G
3
B
4
Not connected
5
CSYNC
A
• Macintosh adaptor may be required for use for some Macintosh computers.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Pin No.
Signal name
6
GND (Ground)
7
GND (Ground)
8
GND (Ground)
9
+5V
0
GND (Ground)
Displaying an image from a computer
When connecting to a computer, the correct input
signal type is automatically detected. (See page 49.)
If the computer image does not come in clearly, you
may need to set the Auto Sync. adjustment on the "Auto
Sync." in the menu. (See page 48.)
You only need to select the input source on the "INPUT
SOURCE" menu.
To view an image from a computer, select "PC" from
the "INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Display. (See page 49.)
A
• Each time b is pressed, the input source toggles.
Computer
Pin No.
Signal name
q
Not connected
w
SDA
e
HD
r
VD
t
SCL
Advertisement
Table of Contents
