Connecting The Fish 4200 To Other Instruments - Navman FISH 4200 Installation And Operation Manual

Single Engine Fuel Wiring Option
Power fuel
cable 2m
8 pin Black
8 pin White
cable 8m
5-5 Connecting a FISH 4200 to other instruments
Several NAVMAN instruments can be connected
together to share data such as Depth or Speed. The
FISH 4200 uses the NMEA protocol to output data to
other instruments.
NMEA
NMEA is an industry standard for marine instrument
communications. Data sent by one instrument over
REPEAT 3100
Repeater for depth, speed, water temperature and
battery voltage. Can accept many other NMEA data
inputs from other instruments.
Please contact your NAVMAN dealer for information on NAVMAN's full range of NMEA enabled instruments
and connection options.
FISH 4200 Installation and Operation Manual
fuse
Fuel Transducer
Twin Engine Fuel Wiring Option
Power fuel
cable 2m
8 pin Black
8 pin White
cable 8m
Fuel Transducer
Port
an NMEA line can be read and displayed by
another instrument that accepts NMEA 0183
Version 2. Depth, speed and temperature data is
output by the FISH 4200 and can be read and
displayed by the NAVMAN REPEAT 3100,
DEPTH41, GPS Chartplotter (5000 series), or
other NMEA instrument.
DEPTH41
Depth repeater.
fuse
8 pin White
cable 8m
Twin engine
fuel adaptor
Fuel Transducer
Starboard
25