Table of Contents
Advertisement
Switching the Screen Display
If you press E, you can change the screen display mode, such as switching between display/
no display of symbols, etc.
When Shooting
Display Symbols
ÅEIn the Synchro-Monitor Mode except with the following operations, the LCD Monitor is turned off (No Display). This is
a useful mode to reduce power consumption.
Half-press the shutter button.
Q
Press the
(Quick Review) button.
M
Press the
• You cannot turn the LCD Monitor Display on/off by pressing
• Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.
• In Voice Memo Mode, you can turn the LCD Monitor Display off by pressing the E button.
When the No Display or Grid Guide Display is on, symbols will appear for a few seconds right after you have
pressed Self-timer, Flash or Macro button.
For how to display the grid guide, see p.77.
When Playing Back
Display Symbols
Ebutton
• In Voice Memo Mode, you can turn the LCD Monitor Display off by pressing the Ebutton.
No Display
Ebutton
The LCD Monitor is tuned on and you can confirm composition. After you
finish shooting with Full-Press, the LCD Monitor will automatically turn off.
You can view the photo you just took (see p.80). By pressing the
(Quick Review) button again, you can turn the LCD Monitor off.
The LCD Monitor Display is turned on and you can make various settings
button.
for shooting (see p.27). By pressing the
turn the LCD Monitor off.
No Display
Chapter 1 / Section 1 Getting Started
Grid Guide
Display
T
F
(Self-timer),
(Flash) or
21
Synchro-Monitor
Mode
M
button again, you can
N
(Macro) buttons.
Q
Advertisement
Table of Contents
