To Quit Shooting With Memos - Ricoh Caplio G3S Operation Manual

To Quit Shooting with Memos

To clear the Memo mark to quit shooting with a
camera memo, follow the steps below.
Set the Mode Dial to 5 (Shooting Mode).
Press the O button.
The Memo screen appears.
• Even when the Camera Memo screen is displayed, you can shoot by pressing the shutter button.
• When shooting with camera memos, you cannot use Auto Bracket or White Balance Bracket.
• When interval shooting, you cannot make the camera memo settings.
• Memos cannot be attached to movies and sounds.
• The camera memo list file is not erased even if you initialize the SD memory card by using the camera's
CARD formatting function.
• You can also attach a camera memo to a still image after it is taken.
• For how to view a camera memo attached to a still image, see p.156.
• For how to attach a camera memo to a still image, see p.151.
• For how to register, play back or change a voice memo, see p.164.
• For how to create a camera memo, see p.147.
• For how to create or correct a temporary memo, see p.153.
Chapter 3 / Section 3 Shooting with Camera Memos
Press the M button.
The MEMO mark disappears and the Camera Memo
mode is turned off. To resume shooting with camera
memos, press the [OK] button to display the Camera
Memo screen.
152