Viewing Movies; Adjusting The Movie Sound Volume - Ricoh Caplio G3S Operation Manual

Viewing Movies

To view movies, follow the steps below.
Buttons used here
Turn the Mode Dial to 6 (Playback Mode).
The last still image taken is displayed.
For movies, the first frame is displayed as a still
image.
Move to the movie you want to see using the
#$ buttons.
If you press the $ button, you can view the next still
image or movie.
If you press the # button, you can view the previous
still image or movie.
Movie Frames
Movies are made up of many frames which seem to move when displayed at high speed.
For information displayed on the screen during playback, see p.20.
Chapter 1 / Section 4 Playing Back Still Images, Movies, and Sounds
Press the shutter button.
Playback begins. The elapsed playback indicator or
the elapsed time is displayed on the LCD Monitor.
Fast Forward
Rewind
Pause/Playback
Slow Playback
Slow Rewind
Next frame
Previous frame
Adjusting the Movie Sound
Volume
To adjust the volume, follow the steps below.
Press the #$ buttons.
The volume adjustment bar appears.
Press the !" buttons to adjust the volume.
The volume can be set to nine levels.
The setting will be used until you change it.
85
Press the z (telephoto) button
during play.
Press the Z (Wide-Angle) button
during play.
Press the shutter button.
Go on pressing the z (telephoto)
button during pause.
Go on pressing the Z (Wide-
Angle) button during pause.
Press the z (telephoto) button
during pause.
Press the Z(Wide-Angle) button
during pause.