Switching The Screen Display - Ricoh Caplio 300G Operation Manual

Switching the Screen Display

If you press
display of symbols, etc.
TWhen Shooting
Display Symbols
ÅEIn the Synchro-Monitor Mode except with the following operations, the LCD Monitor is turned off (No Display). This is
a useful mode to reduce power consumption.
Half-press the shutter release button.
Press the (Quick Review) button.
Press the button.
• You cannot turn the LCD Monitor Display on/off by pressing
• Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.
When the No Display or Grid Guide Display is on, symbols will appear for a few seconds right after
you have pressed Self-timer, Flash or Macro button.
For how to display the grid guide, see p.71.
TWhen Playing Back
Display Symbols
, you can change the screen display mode, such as switching between display/no
No Display
The LCD Monitor is tuned on and you can confirm composition. After you
finish shooting with Full-Press, the LCD Monitor will automatically turn off.
You can view the photo you just took (see p.74). By pressing the
(Quick Review) button again, you can turn the LCD Monitor off.
The LCD Monitor Display is turned on and you can make various settings
for shooting (see p.27). By pressing the
the LCD Monitor off.
No Display
button
Chapter 1 / Section 1 Getting Started
Grid Guide
Display
button
(Self-timer),
21
Synchro-Monitor
Mode
button again, you can turn
(Flash) or (Macro) buttons.