Turning The Power On/Off; To Turn The Camera On; To Turn The Camera Off - Ricoh Caplio G3S Operation Manual

Turning the Power On/Off

The camera is switched between On and Off as follows.

To turn the camera On

Press the power button
The flash lamp and auto-focus lamp will flash
altermately for several seconds.

To turn the camera Off

Auto Power-off
• If the camera goes unused for a set period of time, it will automatically turn itself off to save power. To use
the camera again, simply press the power switch.
At time of purchase, the Auto Power-off function is set to one minute.
• The Auto Power-off function does not work when connected to your computer.
Power-Save Mode
You can reduce the power consumption of the LCD Monitor and extend the life of your batteries. If you have
activated Power-Save mode, the display on the LCD Monitor will turn off in Shooting Mode. When the LCD
Monitor is dark, turn the SETUP Dial to check the Power-Save mode setting.
For how to change the Auto Power-off time, see p.109.
For how to set the Power-Save Mode, see p.114.
Chapter 1 / Section 1 Getting Started
To turn the camera Off
Press the power button
13