Checking The Printing Layout; Making Printer Settings; Printing Images - Ricoh Caplio G3S Operation Manual

Checking the Printing Layout

You can check the print preview before printing.
Select [Print Preview] from the [File] menu.
The print preview screen appears.
Functions of the buttons shown at the top of the
screen are as follows:
[##Print##]
Displays the [Print] dialog box to start printing.
[##Next Page##]
Displays the next page.
[##Previous Page##]
Displays the previous page.
[##2 Pages##]
Displays two pages on the screen at a time.
[##Enlarge##]
Zooms in on the page.
[##Reduce##]
Zooms out on the page.
[##Close##]
Closes the print preview screen.
Chapter 2 / Section 2 Displaying Thumbnail Images (How to Use DU-10s)

Making printer settings

Selecting [Printer Setup] from the [File] menu
allows you to make printer-related settings such
as selection of a printer, paper size, and paper
feed method.

Printing Images

To print images, follow the steps below.
Select the images you want to print by
clicking on them.
To select two or more contiguous images, click the
first image and then click the last image while
pressing the [Shift] key.To select two or more distant
images, click them one after another while pressing
the [Ctrl] key.To print all thumbnail images displayed,
go to step
Select [Print] from the [File] menu.
The [Print] dialog box appears.
Check the printer name, and click the
[Properties] button to make printer settings if
required.
Perform either of the following operations:
• To print the selected images, select [Selection] in
• To print all images, specify the number of copies and
142
directly.
[Print range], specify the number of copies, and click
the [OK] button.
click the [OK] button.