Trouble Shooting
PROBLEM
Vacuum won't turn on
Vacuum won't pick up or
low suction
Dust escaping from vacuum
POSSIBLE REASON
• Power cord not firmly
plugged in
• Blown fuse or tripped
breaker
• Needs service
• Vacuum bag full
• Clogged filter
• Hose clogged
• Worn brushroll
• Broken belt
• Dust cover not installed
properly
• Filter not installed
correctly
• Vacuum bag not installed
correctly
Any other service should be done by an
Authorized Service Representative.
Service 1-888-6-RICCAR
To locate your nearest retailer, visit our website at
www.riccar.com
Problem Solving Guide
POSSIBLE SOLUTION
• Plug unit in firmly
• Check house fuse or
• Take to Authorized Retailer
• Install new bag
• Install new filter
• Remove obstacle
• Replace brush strips
• Replace belt
• Reinsert the dust cover
• Review filter installation
• Review bag installation
27
breaker. Replace fuse /
reset breaker.
(-888-6-RICCAR)
and secure latch
(page 20)
(page 9)