IMPORTANT SAFETY INSTRUCTIONS Read All Instructions Carefully Before Using This Appliance When using an electrical appliance, basic precautions should always be followed, including the following : WARNING - 11. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
DESCRIPTION AND USING FULL BAG INDICATOR How to check the FULL BAG INDICATOR: • If the red indicator appears: - Empty the vacuum bag. - If the vacuum bag isn’t full and the full bag indicator is red, check the hose for a clog. •...
CORD REWIND ON/OFF SWITCH m the body, pull the e buttons. Adapter button POWER CONTROL Power control is on the canister body not the handle STOP EANING TOOLS STORAGE • Insert the brush holder Crevice Tool on the neck of the wand into the groove.
HOW TO USE POWER NOZZLE 1. Turning on the Power Nozzle The power nozzle can only be turned on if the canister is also turned on (canister on / off switch is located on the main body). The power nozzle on / off switch is located on the handle.
Pull out the belt cover guard (see diagram 11) and pull the brushroll out. OPERATION If the circuit breaker trips: a. Turn off the vacuum cleaner and power brush then unplug the power cord. b. Remove the object preventing the brushroll from turning.
Page 8
MAINTENANCE AND CARE 3. Replacing the Bulb IMPORTANT: Before performing any maintenance work on the power brush, always unplug the vacuum cleaner and disconnect the wand. Turn the power brush over and remove the bottom plate by first unscrewing the two bottom plate screws located by the rear wheels (see diagram 10).
Page 9
DIAGRAM 1 REAR VIEW OF POWER WAND AND NOZZLE ASSEMBLY DIAGRAM 2 FRONT VIEW OF POWER WAND AND NOZZLE ASSEMBLY...
SAFETY PRECAUTIONS This vacuum cleaner should be used for normal, dry household dust and dirt. The manufacturer cannot be held responsible for any damage caused by use or operation of the vacuum contrary to these instructions. If the vacuum is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage.
REPLACING VACUUM BAG & FILTERS Full Bag Indicator Dust Cover • Turn canister off, remove hose and open the dust cover. NOTE: We recommend the vacuum bag is changed when indicator is RED or suction power is weak. Dust cover will not close without a bag in the unit or if the bag is not fully inserted. Charcoal Filter •...
Weight Dimension (L X W X H) Cord Length • Specifications can be changed for improvement without notice. For assistance please visit www.Riccar.com or call 1-888-6-Riccar. Check Point • Vacuum bag • Wand or hose • Is the hose adapter inserted...
Need help?
Do you have a question about the 1500P and is the answer not in the manual?
Questions and answers