Riccar 1800 Owner's Manual

Riccar vacuum cleaner user manual
Hide thumbs Also See for 1800:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Riccar 1800

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read All Instructions Carefully Before Using This Appliance When using an electrical appliance, basic precautions should always be followed, including the following : WARNING - 11. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
  • Page 3: Table Of Contents

    CONTENTS CANISTER FEATURES ... 4 ~ 5 HOW TO USE POWER NOZZLE ... 6 ~ 9 HOW TO USE CLEANING TOOLS ... 10 HOW TO REPLACE VACUUM BAG ... 10 HOW TO REPLACE FILTERS ... 11 SAFETY PRECAUTIONS ... 12 TROUBLESHOOTING GUIDE ...
  • Page 4: Canister Features

    CANISTER FEATURES POWER CONTROL HANDLE When lit, change vacuum bag or CHECK check for clog in SERVICE hose FILTER POWER BRUSH When lit, change HEPA filter (page 11) Light indicates when power nozzle is in use. Power nozzle POWER BRUSH On / Off DIRT SENSOR Power Levels:...
  • Page 5: Hose Adapter

    Flexible hose On-board cleaning tools Canister body BRUSH STORAGE Parking slot HOSE ADAPTER Adapter button • When separating the hose from the body, press the adapter buttons to release the hose. MAIN ON / OFF BUTTON • ON - Canister power is on and power nozzle is off. •...
  • Page 6: How To Use Power Nozzle

    HOW TO USE POWER NOZZLE 1. Turning on the Power Nozzle The power nozzle can only be turned on if the canister is also turned on (canister on / off switch is located on the main body). The power nozzle on / off switch is located on the handle.
  • Page 7: Maintenance And Care

    Pull out the belt cover guard (see diagram 11) and pull the brushroll out. OPERATION If the circuit breaker trips: a. Turn off the vacuum cleaner and power nozzle then unplug the power cord. b. Remove the object preventing the brushroll from turning.
  • Page 8 2. Replacing the Power Nozzle Belt IMPORTANT: Before performing any maintenance work on the power nozzle, always unplug the vacuum cleaner and disconnect the wand. To replace the power nozzle belt, you must first remove the brushroll (see "Removing the Brushroll").
  • Page 9 DIAGRAM 1 REAR VIEW OF POWER WAND AND NOZZLE ASSEMBLY DIAGRAM 2 FRONT VIEW OF POWER WAND AND NOZZLE ASSEMBLY...
  • Page 10: How To Use Cleaning Tools

    HOW TO USE CLEANING TOOLS • Open the tool cover lid to access tools. Tool cover lid button • On-board tools can be attached either to the power handle or to the end of the wand. Floor brush: effective for hard surface cleaning (wood, tile, etc) Upholstery tool: ideal for cleaning furniture Dusting brush: (slides off the end of the upholstery tool) for shelves, tables, etc Crevice: designed to clean in tight spaces (i.e.
  • Page 11: How To Replace Filters

    REPLACING THE FILTERS Replacing the charcoal filter: • Unplug canister and remove the hose. • Open the dust cover and locate the charcoal filter behind the bag. • Remove filter case and discard used filter. • Insert new charcoal filter into filter case and re-insert case. •...
  • Page 12: Safety Precautions

    SAFETY PRECAUTIONS This vacuum cleaner should be used for normal, dry household dust and dirt. The manufacturer cannot be held responsible for any damage caused by use or operation of the vacuum contrary to these instructions. If the vacuum is wrongly operated for a purpose other than that for which it is intended, no liability can be accepted for any possible damage.
  • Page 13: Troubleshooting Guide

    Weight Dimension (L X W X H) Cord Length • Specifications can be changed for improvement without notice. For assistance please visit www.Riccar.com or call 1-888-6-Riccar. Check Point • Vacuum bag • Wand or hose • Is the hose adapter inserted...
  • Page 14 ABOUT THIS MANUAL ABOUT THIS MANUAL 담 당 최전형과장님 MODEL 1800(영) BUYER RICCAR 1차 2차 일 정 3차 4차 5차 제 판 한 규 격 148X210( ( 총 총 1 1 4 4 p p a a g g e e ) ) MEMO 2004.07.26-신규...

Table of Contents