Operation - RCA WHP140 Owner's Manual

OPERATION

1. Turn on the audio source (TV or audio component) to which the
transmitter is connected.
2. Slide the ON/OFF switch on the headphone to "ON."
3. Listen to the volume coming from the ear cups on the headphone to
make certain that the volume is not too loud before placing the unit
on your head. (See the section titled "Headset Safety" on page 1.)
Adjust the volume as needed using the VOLUME CONTROL wheel
located on the right ear cup. Once the volume level is at a comfortable
setting, place the headphones over your ears and adjust the volume
as desired.