Vox Tonelab ST Owner's Manual page 25

4. PHASER
This models a popular analog phaser in a banana-colored box.
Knob/Switch Parameter
EDIT RESONANCE*
TAP SPEED*
TAP+EDIT SPEED*
5. TEXTREM
This models the acclaimed tremolo circuit built into a US-made
combo amp.
Knob/Switch Parameter
EDIT DEPTH*
TAP SPEED*
TAP+EDIT SPEED*
6. ROTARY
This models a rotary speaker.
Knob/Switch Parameter
EDIT DEPTH*
TAP SPEED*
TAP+EDIT SPEED*
Adjusts the amount of resonance.
Adjusts the modulation speed in a range of
0.1...15 Hz.
Adjusts the speed.
Adjusts the tremolo depth.
Adjusts the modulation speed in a range of
1.0...15 Hz.
Adjusts the speed.
Adjusts the modulation depth.
Adjusts the modulation speed in a range of
0.8...15 Hz.
Adjusts the speed.
7. PITCH SHIFTER
This is a pitch shifter that allows you to play chords, and has a
variable range of one octave upward or downward.
Knob/Switch Parameter
EDIT BALANCE*
TAP PITCH*
TAP+EDIT PITCH*
8. FILTRON
This is an envelope-controlled filter (wah) that opens or closes a
filter according to the input from the guitar.
Knob/Switch Parameter
EDIT SENS*
TAP TYPE
TAP+EDIT RESONANCE*
Adjusts the balance between direct sound and
effect sound.
Specifies the amount by which the pitch of the
effect sound will be shifted; an octave, a 4th, or a
5th.
Each time you press the switch, the setting will
cycle between -12, -7, -5, DT (Detune), +5, +7,
+12, -12.
Specifies the amount by which the pitch of the
effect sound will be shifted in semitone units (100
cents).
The setting will change as follows: -12, -11, ... -1,
0, DT (Detune), +1, ... +12
Adjusts the sensitivity to the guitar's volume.
If this parameter is assigned to the expression
pedal, the cutoff frequency will be controlled by
the expression pedal, meaning that the opening/
closing of the filter will not be affected by the input
from the guitar.
Specifies the direction of movement (up or down).
If Up is selected, the TAP switch LED will light.
Adjusts the amount of resonance.
21