Connecting To Your Computer (Usb Connection); Using Librarian Software; Transferring Audio Data - Vox Tonelab ST Owner's Manual

Connecting to your computer (USB
connection)
If you use a commercially available USB cable to connect the
ToneLab ST to your computer, you'll be able to use librarian soft-
ware on your computer to manage user programs, and use the
ToneLab ST as a USB audio interface.

Using librarian software

If you install the USB-MIDI driver on your computer, you'll be
able to use the dedicated librarian software to back up programs
and manage your data library.
Download the USB-MIDI driver and the librarian software from
the manufacturer's website (www.voxamps.com).
For details on using the librarian software, refer to the owner's
manual (PDF file) of the librarian software.
Operating requirements
Windows: Microsoft Windows XP SP3/Windows Vista SP1 or
later
Mac: OS X 10.4 or later (Power PC G4 or more/Intel CPU)

Transferring audio data

If the ToneLab ST is connected to your computer via a USB
cable, the ToneLab ST's effect output can be recorded directly
into an audio track of your DAW software. You'll also be able to
monitor the audio playback of your software via the ToneLab ST.
28
NOTE: If you're using Windows, you'll need to install the
USB-ASIO driver in your computer in order to transfer audio
data via the USB connector.
Download the USB-ASIO driver from the manufacturer's
website (www.voxamps.com).
The following illustration shows the signal flow when connected
to your computer.
ToneLab ST
Effect
INPUT
The ToneLab ST's effects will not be applied to the audio input
from the USB connector.
Operating requirements
Windows: Microsoft Windows XP SP3/Windows Vista SP1 or
later
Mac: OS X 10.4 or later (Power PC G4 or more/Intel CPU)
OUTPUT
USB