Expression Pedal Minimum And Maximum Values - Vox Tonelab ST Owner's Manual

NOTE: The settings you made will return to their original
values if you switch programs or turn off the power before
saving.
To assign volume, gain, or the input level to the reverb or delay
effect, proceed as follows.
• Volume: Operate the VOLUME knob, and then hold
down the EXP PARAM switch for about two seconds.
• Gain: Turn on the AMP on/off switch, operate the GAIN
knob, and then hold down the EXP PARAM switch for
about two seconds.
• Input level to the reverb effect: Turn on the REVERB
on/off switch, operate the REVERB knob, and then hold
down the EXP PARAM switch for about two seconds.
• Input level to the delay effect: Turn on the MOD/
DELAY switch, and use the MOD/DELAY selector to
select "ECHO PLUS," "DELAY," or "CHORUS+DELAY."
Then operate the EDIT knob, and then hold down the EXP
PARAM switch for about two seconds.
To clear the expression pedal to an unassigned state
Hold down the EXP PARM switch and press the EXIT/TUNE
screen. The expression pedal assignment will be cleared, and the
EXP LED will go dark.
The expression pedal will also revert to an unassigned state if
you switch to a different effect. However in the following cases,
the setting will be maintained and the assignment will not
change.
• If the amp model's GAIN parameter is assigned to the
expression pedal, changing the amp model will leave the
GAIN parameter assigned to the expression pedal.
• If the input level to the reverb effect is assigned to the
expression pedal, changing the reverb type will leave the
reverb input level assigned to the expression pedal.
• If the input level to the delay effect ECHO PLUS, DELAY,
or CHORUS+DELAY is assigned to the expression pedal,
changing between these three delay effects will leave the
delay effect input level assigned to the expression pedal.

Expression pedal minimum and maximum values

The minimum value is when the expression pedal is fully
returned toward yourself; the maximum value is when the
expression pedal is fully advanced away from yourself.
When you assign a parameter or volume to the expression
pedal, the minimum and maximum values of the expression
pedal will be set automatically.
Adjusting the minimum and maximum parameter values
When you assign an effect parameter to the expression pedal,
the minimum and maximum values appropriate for that param-
eter will be assigned as the minimum and maximum values of
the expression pedal. If you assign the PITCH parameter of the
PITCH SHIFTER, the minimum value will be "0" (no pitch shift)
and the maximum value will be the current value.
You can adjust the minimum and maximum values as follows.
NOTE: If the reverb effect input level is assigned to the
expression pedal, the minimum and maximum values will be
set automatically, and cannot be changed.
1.
Press the EXP PARAM switch.
The QUICK ASSIGN LED will blink.
25