TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
The included LDB-3 control module has a disable input which is ideal for two-button emergency phones, such as
Viking's E-1600-20A, allowing "Info" button calls to be placed without activating the relay (turning on the emergency
strobe light, camera, etc.) Three DIP switches are provided for turning ring detection on or off, off-hook/loop detec-
tion on or off and for selecting a ring cadence mode which allows the relay to follow ringing or to remain activated
during the off time of standard ring cadence.
The control module can be installed on any standard telephone line or analog PABX/KSU station. The 1 million can-
dle power strobe can be interfaced to flash on ringing, off-hook or a combination of ringing and off-hook (line in-use).
The LDB-3 ring/loop detect control module is also available separately, see DOD# 409 for more information.
The BLK-3-EWP is equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is
exposed to precipitation or condensation. EWP products feature foam rubber gaskets and boots, sealed connec-
tions, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed,
field-adjustable trim pots and DIP switches for easy on-site programming. For more information, see DOD# 859.
The kit includes: (1) LDB-3 control module, (1) blue strobe light, (1) 12V DC power adapter, (13) gel-filled butt con-
nectors and (1) single gang weatherproof mounting box with gaskets and hardware.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• LDB-3 control module comes with Enhanced Weather
Protection (EWP), EWP products are designed to meet IP66
Ingress Protection Rating, see DOD# 859
• Durable polycarbonate lens
• Long life 1 million candle power blue strobe light
• Flush mount or surface mount with weatherproof
single gang box (included)
• 3/4" knockouts for connecting conduit, etc.
• Strobe and control module may be installed separately
• Can be configured to signal: ringing, off-hook, or a
combination of both ringing and off-hook (line in-use)
• One set of (NO) normally open and (NC) normally
closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain
flashing between rings)
• Switched 12V DC output (follows relay activation for
powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop detection
• Disable input, ideal for use with two-button emergency phones
like Viking's E-1600-20A (DOD# 215), will not activate strobe
light on "Info" calls
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
P
h
o
n
e
.
.
.
7
1
5
.
3
8
6
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
.
8
8
6
1
.
8
8
6
1
P
r
a
c
P
r
a
c
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
Provide Strobe Light
Indication of Line Status
Ideal for Use with Two-Button Emergency Phones!
The BLK-3-EWP provides high visibility indication of analog line status
through a high powered one million candle power strobe light. The BLK-
3-EWP is the ideal solution for the hearing impaired and can be used
equally well in loud warehouses or factories, where ringing phones can not
be heard. Alternatively, the BLK-3-EWP can be used to add emergency
notification to pre-existing emergency phones by turning on the strobe
light when the emergency phone is in use.
A
p
p
l
A
p
p
l
• Ringing Phone or TTY indication for the hearing impaired
• Ringing phone indication in loud warehouses and factories
• Emergency illumination for emergency phones in elevators,
campuses, hallways, parking ramps, etc.
• Alarm indication for security systems or alarm panels with
phone dialers
S
p
e
c
S
p
e
c
Power: 120V AC to 12V DC adapter provided
Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x
2.1" x 1.0")
Shipping Weight: 1.5 kg (3.3 lbs)
Operating Temperature: -26° to 54°C (-15° to 130° F)
Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
Minimum Loop Current: 15 mA
Minimum Ring Voltage: 25V RMS
Strobe Output: 1 million candle power @ 1 second flash rate
Ringer Equivalence: 0.5 A REN
Disable/Info Switch Input: 50mA/80mW maximum
Mounting: Fasten to wall, post, etc. with complete surface
mounting hardware included
Connections: Color coded wires with gel-filled butt connectors
BLK-3-EWP
BLK-3-EWP
Line Status Strobe
t
i
c
e
t
i
c
e
Light Kit with EWP
September 28, 2012
E
N
T
U
R
Y
E
N
T
U
R
Y
i
c
a
t
i
o
n
s
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s