Setting The Flash - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH
Photo Mode :
Setting the Capturing Options

Setting the Flash

Flash is very useful not only for brighter subjects at night, but also in
daytime when there is not enough lighting on the subject, such as in a
shadow, indoors, and in backlight situations.
1. Turn the Mode Dial to Photo
2. Press the [POWER] button to turn on the
Miniket Photo.
3. Press the [MENU] button.
N Menu screen appears.
4. Move the joystick left / right to select <Flash>.
5. Select an option by moving the joystick up /
down, and then press the joystick (OK).
Flash will go off. Select this option when flash use is
Off ( )
limited such as in a museum.
Flash will be set automatically according to lighting
Auto ( )
conditions.
Flash will be set automatically according to lighting
Red-eye ( )
conditions, with red-eye reduction.
Forces the flash to go on despite the lighting
Fill-in ( )
conditions. May not go on under overly strong lighting.
To have a brighter subject and scene (backdrop),
the Miniket Photo will first allow longer exposure
Slow Sync. ( )
and then throws the flash on the subject. It is
recommended to use a tripod to avoid blurred
images.
6. Press the [MENU] button to exit the menu.
[ Notes ]
✤ You can easily access this function by using the
shortcut button (refer to page 58).
✤ Regarding Flash setting in Scene modes, refer to
page 72.
✤ It is recommended to use a tripod for best results
when recording with <Slow Sync.> flash mode.
✤ While the menu screen is displayed, pressing the
[Record / Stop] button will exit the menu.
mode.
3
2592
Photo
Flash
Photo
4
Photo Photo Flash
Photo
Flash Flash
Move
Off
Flash
Auto
Red-eye
Move
Fill-in
Photo
Move Move
5
Move
Photo Photo Flash
Flash Flash
Photo
Off
Auto
Photo Flash
Red-eye
Move
Fill-in
Flash
Move Move
6
Move
2592
Move
23
23
23
IN
23 23
N
Select Exit
Select Exit
OK Select Select MENU Exit Exit
Select Exit
Select Exit
OK Select Select MENU Exit Exit
23 23 IN
Select Exit
✤
23
✤
Select Exit ✤
23
✤
23
71 71