Setting The White Balance - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH
Photo Mode :
Setting the Capturing Options

Setting the White Balance

The White Balance allows calibration of the picture for
accurate colour display in different lighting conditions.
It is recommended to set the white balance prior to any recording.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
N Menu screen appears.
4. Move the joystick left / right to select <White Balance>.
5. Select an option by moving the joystick up / down, and
then press the joystick (OK).
N To set the Custom WB, frame the white subject on
the center. Press the joystick (OK) to set, or press the
[MENU] button to cancel and exit to Menu screen. Photos
captured after the Custom WB set will be affected by the
setting.
Automatically sets according to the shooting
Auto
environment.
Adjusts the colour according to
Daylight
daylight/indoor, outdoor light
You can select this when you cannot have
Cloudy daylight as a direct light, such as when it is
partly-cloudy or cloudy.
Suitable in a halogen or 3-wavelength light
Fluorescent H
environment.
Suitable for a fluorescent light environment.
Fluorescent L
Suitable for an incandescent light
Tungsten
environment.
You can adjust the white balance as you wish
Custom WB
based on the shooting environment.
6. Press the [MENU] button to exit the menu.
N An icon indicating the selected white balance appears
on the screen.
N If <Auto> is selected, no icon will be displayed.
[ Notes ]
✤ In general outdoors picture taking, <Auto> setting will allow
users to have best results.
✤ As the lighting condition changes, set the appropriate white
balance before taking a picture.
✤ The subject used for <Custom WB> should be white. If not,
the colour balance will not be natural.
✤ Regarding White Balance setting in Scene modes, refer to page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop] button will
exit the menu.
23
23
23
3
23 23 IN
2592
Photo
White Balance
Photo
4
White Balance
Photo Photo
ISO
Photo
White Balance White Balance
Move Select Exit
Auto A
White Balance
Daylight
Cloudy
Move Select Exit
Fluorescent H
Photo
Move Move Select Select Exit Exit
OK MENU
White Balance
Move Select Exit
5
Photo Photo
ISO
White Balance White Balance
Photo
A
Auto
Daylight
White Balance Photo
Cloudy
Move Select Exit
Fluorescent H
White Balance
Move Move OK Select Select MENU Exit Exit
6
IN
23 23
Move Select Exit
2592
23
Move Select Exit
23
23
N
N
Suitable in a halogen or 3-wavelength light
environment.
N
N
✤
✤
✤
✤
✤ While the menu screen is displayed, pressing the
[Record / Stop] button will exit the menu.
69 69