Samsung VP-MS10 Series Owner's Instruction Manual page 132

ENGLISH ENGLISH
PictBridge Mode: Printing with PictBridge
Printing with PictBridge
Wihth the provided USB cable and a PictBridge-supporting printer, you
can print your photo images directly without connecting to a PC.
1. Connect the Miniket photo and the
PictBridge supporting printer with a USB
cable.
2. Turn on the printer.
3. Press the [POWER] button to turn on the
Miniket Photo.
N If the USB connection is not made, the
message "Connect USB Cable!"
appears.
4. Press the [Shortcut 2] button to set the
date / time imprint option.
N Each press of the [Shortcut 2] button
cycles through Off <
Time < >-Date&Time <
5. [Shortcut 3] button will increase the number of
copies, while the [Shortcut 4] button will decrease
the number of copies.
N Range of possibilities: 1 ~ 99
N Pressing the [Shortcut 3] button on 99 will set to 1.
N Pressing the [Shortcut 4] button on 1 will set to 99.
6. Press the [Shortcut 1] button to begin printing.
N To cancel printing, press the [Shortcut 1] button again.
7. When finished, disconnect the cable.
[ Warning ]
✤ This function works only with printers that support PictBridge.
[ Notes ]
✤ Number of copies and imprint options can be set in the menu.
Press the [MENU] button to access the function.
✤ For printing information, refer to printer's product information.
✤ Depending on the printer, printing failure may occur. In this case,
try to print from a PC after copying images onto the PC.
✤ Depending on the printer, date and time imprint option may not be
supported. In this case, date and time menu will not be displayed.
132 132
>-Date < >-
>.
PictBridge
N
N
N
N
N
N
✤
✤
✤
✤
✤