Charging The Battery Pack - Samsung VP-MS10 Series Owner's Instruction Manual

ENGLISH
How to Use the Battery Pack

Charging the Battery Pack

You can charge the Battery Pack using AC Power
Adapter or USB cable.
1. Turn off the Miniket Photo by pressing the
[POWER] button.
N Charging will begin only when the Miniket
Photo is turned off (using AC Power
Adapter or USB cable).
2. Insert the Battery Pack to the Miniket
Photo.
3. Open the Connector Cover of the set.
4. Charge the Miniket Photo.
Connect the AC Power Adapter with the
AC Power
Miniket Photo properly and plug the AC
Adapter
Power Adapter to the wall outlet.
Connect the USB Cable with the
USB
Miniket Photo properly and connect
Cable
the other side to a USB port of a PC.
[ Notes ]
✤ You may use the Miniket Photo powered by
the AC Power Adapter indoors where
available.
[ Warning ]
✤ It is recommended to fully charge the Battery Pack before use.
✤ You should only charge the battery in an environment between
and 104°F (40°C).
✤ Ambient temperature may affect charging the Battery Pack; too low
temperature may result in longer charge time / incomplete charging.
✤ Before connecting the cable, make sure that you don't have any foreign
substances between connectors.
24 24
Connecting the AC Power Adapter
Connecting the USB Cable
4
[ ]
✤
32°F (0°C)
✤
✤
✤
You can charge the Battery Pack using AC
Power Adapter and USB cable.
1.
N Charging will begin only when the
Miniket Photo is turned off (using AC
Power Adapter or USB cable).
2.
DC Power Jack
3.
4.
5.
Connect the AC Power Adapter with the
AC Power
Miniket Photo properly and plug the AC
Adapter
Power Adapter to the wall outlet.
Connect the USB Cable with the
Miniket Photo properly and connect
Cable
the other side to a USB port of a PC.
USB Charging will charge the Battery
Pack up to 85%.
USB Port
[ ]
✤
.