Print Paper Installation - Kodak 305 User Manual

BEFORE OPERATION
Attach the supplied paper flanges to both sides of the print
paper.
When you pinch the latches on the paper flange, the stoppers retract into the shaft.
Attach the flanges to the print paper with the stoppers retracted.
Make sure that the flanges are attached to the print paper securely, and release the
latches.
• Take care not to pinch your fingers.
• Do not remove the sticker on the print paper roll yet.
• Do not loosen the paper roll. Any slack in the print paper may degrade the print
quality.
• When placing the print paper, keep the print paper upright.
• When you put the print paper sideways, it may roll and fall. This may cause injury.
• Fingerprints or dust on the paper's surface may degrade print quality and cause
paper jams.
Press the POWER switch on the rear panel to turn on the
power.
After the POWER indicator's color has changed from orange to
green, press the OPEN button to release the printing unit out.
Remove the trim tray and then pull the knob to open the door.

PRINT PAPER INSTALLATION

NOTE
CAUTION
NOTE
Sticker
INCORRECT CORRECT
POWER switch
OPEN button
Knob
10