Table of Contents
Advertisement
A4 Right-click the My computer icon, and select Manage. When the Computer
A5 In the case of Windows XP, click Advanced in the [Wireless Network Connection]
Q6 When connecting to a computer-to-computer (Ad Hoc) network,
A1 Make sure that the security settings and network name of the computer-to-com-
A2 Check the TCP/IP properties of the computers to be connected through the com-
Q7 When using a computer-to-computer (Ad Hoc) network,
A It may happen occasionally when you are using a computer-to-computer (Ad
Q8 The network does not operate properly when both the wireless
A You cannot use the wireless and the wired network connections using the same IP
7-20
Manual
Management window appears, double-click Services and Applications on
the left, and then click Services from the sub menu tree. Select the Standard tab
in the right pane, double-click Wireless Zero Configuration and check that
Startup Type is configured to Automatic, and the Service status is Started.
dialog box (see p.4-8 'Connecting to an AP') and make sure that 'Use Windows
to configure my wireless network settings' is selected.
This may happen when a third-party wireless network setup program (e.g.
PROSet) other than Windows XP default program is installed. For setting up a
wireless network using the Windows XP program, this option should be selected.
I cannot connect to another computer connected to the same
computer-to-computer network.
puter (Ad Hoc) network is correct.
puter-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
If the TCP/IP Settings are configured to DHCP, the address is automatically
configured to an address within the subnet IP range. This will take about 2~3
minutes.
If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter,
configure IP address:10.0.0.1~10.0.0.254, and Subnet mask:
255.255.255.0, and then try again.
A fixed IP is recommended for a small-size network.
sometimes I cannot search the access point.
Hoc) network connection. Even if you cannot find some access points, the
computer-to-computer (Ad Hoc) network is operating properly. Click Refresh to
view the latest search result.
and the wired network connections are simultaneously
configured with the same IP address.
address simultaneously. To use either the wireless or the wired network in turn
Advertisement
Table of Contents
