Table of Contents
Advertisement
Display Related
Q1 The LCD screen is too dark or too bright.
A Adjust the LCD screen brightness. Use the <Fn> + <
Q2 The screen saver disturbs screen viewing during Media Player or
video file operation.
A Unselect Tools > Option > Player > Allow screen saver during playback in the
Media Player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT>+<Enter> key displays a broken image for a short period.
A The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 When I connect a projector, and change the setting to display
screen image on both the LCD and the projector by pressing
<Fn>+<
> keys, screen is not displayed properly.
A Press <Fn>+<
> keys once again.
If the same problem continues, it means the projector cannot support the resolu-
tion. Lower the resolution to 1024 x 768.
Q5 After connecting to a TV, some programs such as Debug, Mem,
etc. do not run in full screen MS-DOS mode.
A If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q6 Switching the MS-DOS command prompt to full screen mode or
Windows mode by pressing the <Alt>+<Enter> keys does not
operate properly.
A Pressing the <Alt>+<Enter> keys using an USB keyboard, may cause the key
input to be recognized as multiple key inputs depending on the keyboard input
recognition time. In this case, the MS-DOS command prompt is repeatedly
switched to full screen and then to Windows several times. Please press the
<Alt>+<Enter> keys more quickly, or press the <Alt>+<Enter> keys using the sys-
tem keyboard.
>, <Fn> + <
> keys.
Chapter 7. Recovering the Computer
7-11
Advertisement
Table of Contents
