Pioneer KEH-P4010R Operation Manual page 9

MAN-KEH-P5010R-GB_B.fm Page 9 Friday, October 6, 2000 2:22 PM
This function selects only stations with especially strong signals.
*
The BSM function stores stations in memory automatically.
*
The stations with the strongest
signals will be stored under buttons
1– 6 and in order of their signal
strength.
*
RDS (Radio Data System) is a system for transmitting data along with FM programs.
This data, which is inaudible, provides a variety of features such as: program service
name, program type display, traffic announcement standby, automatic tuning and
program type tuning, intended to aid radio listeners in tuning to a desired station.
"LOC"
• RDS service may not be provided by all stations.
• RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement
standby), are only active when your radio is tuned to RDS stations.
With this function, the names of networks/stations providing RDS services replace the
frequency on the display a few seconds after they are tuned in.
*
Hold for 2 seconds
Each press of the DISPLAY button for 2 seconds selects the display in the following
order:
Program Service Name ] PTY Information ] Frequency
• After switching displays, if you do not perform an operation within 8 seconds, the Program
Service Name is automatically displayed.
)
PTY (Program Type ID code) information for the currently tuned station appears on the
display for 8 seconds. The information is correlated with the list in the section "PTY
Function" on page 12.
• If a PTY code of zero is received from a station, "NONE" will be displayed. This indicates
that the station has not defined its program contents.
• If the signal is too weak for this product to pick up the PTY code, "NO PTY" will be displayed.
)
The frequency of the current station appears on the display.