Pioneer KEH-P4010R Operation Manual page 19

MAN-KEH-P5010R-GB_B.fm Page 19 Friday, October 6, 2000 2:22 PM
• A loose or warped label on a cassette tape may interfere with the eject mechanism
of the unit or cause the cassette to become jammed in the unit. Avoid using such
tapes or remove such labels from the cassette before attempting use.
• The music search and repeat functions may not work properly with the following
kinds of recorded tapes because the gap between songs cannot be found correctly.
* A tape with a gap of 4 seconds or less between songs.
* A tape containing dialog, etc., with pauses lasting for 4 seconds or longer.
* A tape with an extremely quiet passage in the music lasting for 4 seconds or
longer.
• Do not use tapes longer than C-90 type (90 min.) cassettes. Longer tapes can
interfere with tape transport.
• Storing cassettes in areas directly exposed to sunlight or high temperatures can
distort them and subsequently interfere with tape transport.
• Store unused tapes in a tape case where there is no danger of them becoming loose
or being exposed to dust.
If the head becomes dirty, the sound quality will deteriorate and there will be sound
dropouts and other imperfections in performance. In this case, the head must be
cleaned.
Power source ..... 14.4 V DC (10.8 – 15.1 V allowable) Tape ................. Compact cassette tape (C-30 – C-90)
Grounding system .................................. Negative type Tape speed ............................................... 4.8 cm/sec.
Max. current consumption ................................... 8.5 A Fast forward/rewinding time
Dimensions ..................................... Approx. 100 sec. for C-60
(mounting size) ... 178 (W) x 50 (H) x 155 (D) mm Wow & flutter ....................................... 0.09% (WRMS)
(front face) ............. 188 (W) x 58 (H) x 19 (D) mm Frequency response .............. 30 – 16,000 Hz (±3 dB)
Weight 1.2 kg Stereo separation ............................................... 45 dB
Signal-to-noise ratio ................. 61 dB (IEC-A network)
Maximum power output
(KEH-P5010R)........................................ 50 W x 4 Frequency range ................................ 87.5 – 108 MHz
(KEH-P4013R, KEH-P4010R, KEH-P4010RB) Usable sensitivity ................................................. 9 dBf
................................................................ 45 W x 4
50 dB quieting sensitivity ................................... 15 dBf
Continuous power output
(KEH-P5010R)........................................ 25 W x 4 Signal-to-noise ratio ................. 70 dB (IEC-A network)
(KEH-P4013R, KEH-P4010R, KEH-P4010RB) Distortion .................... 0.3% (at 65 dBf, 1 kHz, stereo)
................................................................ 25 W x 4 Frequency response .............. 30 – 15,000 Hz (±3 dB)
(DIN45324, +B = 14.4 V) Stereo separation .................. 40 dB (at 65 dBf, 1 kHz)
Load impedance ..................... 4 $ (4 – 8 $ allowable)
Preout maximum output
level/output impedance........................ 2.2 V /1 k$ Frequency range ................... 531 – 1,602 kHz (9 kHz)
Equalizer (3 band equalizer) Usable sensitivity .......................... 18 µV (S/N: 20 dB)
(Low) ................................................Level: ±12 dB Selectivity ............................................. 50 dB (±9 kHz)
(Mid) ................................................Level: ±12 dB
(High) ...............................................Level: ±12 dB
Loudness contour
(Low) ............... +3.5 dB (100 Hz), +3 dB (10 kHz) Frequency range .................................. 153 – 281 kHz
(Mid) ............. +10 dB (100 Hz), +6.5 dB (10 kHz) Usable sensitivity .......................... 30 µV (S/N: 20 dB)
(High) ............. +11 dB (100 Hz), +11 dB (10 kHz) Selectivity ............................................. 50 dB (±9 kHz)
(volume: –30 dB)
Tape ................. Compact cassette tape (C-30 – C-90)
Tape speed ............................................... 4.8 cm/sec.
Fast forward/rewinding time
..................................... Approx. 100 sec. for C-60
Wow & flutter ....................................... 0.09% (WRMS)
Frequency response .............. 30 – 16,000 Hz (±3 dB)
Stereo separation .............................................. 45 dB
Signal-to-noise ratio ................. 61 dB (IEC-A network)
• Specifications and the design are subject to
possible modification without notice due to
improvements.
(0.8 µV/75 $, mono, S/N: 30 dB)
(1.5 µV/75 $, mono)